How to porting collector example in TI-15.4 Stack from CC1310 LaunchPad to CC1310DK

You only have to revise the following red codes in  CC1310_LAUNCHXL.h to make it work. RLED on CC1310 LaunchPad is mapped to LED1 on CC1310DK, GLED on CC1310 LaunchPad is mapped to LED2 on CC1310DK, BTN-1 on  CC1310 LaunchPad is mapped to LEFT BTN on CC1310DK, and BTN-2 on  CC1310 LaunchPad is mapped to RIGHT BTN on CC1310DK.

/* Discrete outputs */
#define Board_RLED                  IOID_25
#define Board_GLED                  IOID_27
#define Board_LED_ON                1
#define Board_LED_OFF               0

/* Discrete inputs */
#define Board_BTN1                  IOID_15
#define Board_BTN2                  IOID_18

/* UART Board */
#define Board_UART_RX               IOID_2          /* RXD  */
#define Board_UART_TX               IOID_3          /* TXD  */
#define Board_UART_CTS              IOID_19         /* CTS  */
#define Board_UART_RTS              IOID_14         /* RTS */

/* SPI Board */
#define Board_SPI0_MISO             IOID_8          /* RF1.20 */
#define Board_SPI0_MOSI             IOID_9          /* RF1.18 */
#define Board_SPI0_CLK              IOID_10         /* RF1.16 */
#define Board_SPI0_CSN              PIN_UNASSIGNED
#define Board_SPI1_MISO             PIN_UNASSIGNED
#define Board_SPI1_MOSI             PIN_UNASSIGNED
#define Board_SPI1_CLK              PIN_UNASSIGNED
#define Board_SPI1_CSN              PIN_UNASSIGNED

/* I2C */
#define Board_I2C0_SCL0             IOID_4
#define Board_I2C0_SDA0             IOID_5

/* SPI */
#define Board_SPI_FLASH_CS          IOID_20
#define Board_FLASH_CS_ON           0
#define Board_FLASH_CS_OFF          1

/* Booster pack generic */
#define Board_DIO0                  IOID_0
#define Board_DIO1_RFSW             IOID_1
#define Board_DIO12                 IOID_12
#define Board_DIO15                 IOID_13
#define Board_DIO16_TDO             IOID_16
#define Board_DIO17_TDI             IOID_17
#define Board_DIO21                 IOID_21
#define Board_DIO22                 IOID_22

#define Board_DIO23_ANALOG          IOID_23
#define Board_DIO24_ANALOG          IOID_24
#define Board_DIO25_ANALOG          IOID_26
#define Board_DIO26_ANALOG          IOID_26
#define Board_DIO27_ANALOG          IOID_26
#define Board_DIO28_ANALOG          IOID_28
#define Board_DIO29_ANALOG          IOID_29
#define Board_DIO30_ANALOG          IOID_30